1 thought on “What does the HP printer M233SDW install the new printer after displaying ER11?”
Phyllis
The main question is that the HP printer M233SDW is installed with a new ink box, what does ER11 mean? ER11 error is not compatible with the carbon powder box and printer. It may be the loss of memory chip or the problem of the carbon powder box itself (non -original consumables). Solution: 1, the printer extends the hand from the paper mouth, and then lifts upwards. 2. After opening the upper lid, press the cover of the cover or the nails from the seam of the inner cover plate or the nail. 3, open the cover board, you can see the internal structure of the machine, with two consumables in the middle position. The 19A imaging drum is on the top and the 18A carbon powder box below. 4, grab the middle of the 18A carbon powder box handle and pull out the 18A carbon powder box out of the internal track of the machine. 5. Grab the consumables and turn the hand to the 180 degrees to check whether the back chip of the consumables is clean. Gently wipe the surface of the chip with a clean paper towels and re -load the carbon box into the inside of the machine to close the cover. 6. If the chip is re -loaded into the printer, if ER11 is still prompted, it is recommended to replace other carbon powder box to try. If it is normal, it may be that there is a problem with the previous carbon powder box. Please contact the dealer to deal with this consumable. If the problem is still after replacement, it is recommended to contact local official service stations for testing for printer hardware issues. 7. If there is no chip after taking out the carbon powder box, it is a high chance that the original consumables of the non -printer brand. The third -party consumables identification and printing quality cannot be guaranteed. It is recommended to consider changing the original consumables of the printer brand.
The main question is that the HP printer M233SDW is installed with a new ink box, what does ER11 mean? ER11 error is not compatible with the carbon powder box and printer. It may be the loss of memory chip or the problem of the carbon powder box itself (non -original consumables). Solution:
1, the printer extends the hand from the paper mouth, and then lifts upwards.
2. After opening the upper lid, press the cover of the cover or the nails from the seam of the inner cover plate or the nail.
3, open the cover board, you can see the internal structure of the machine, with two consumables in the middle position. The 19A imaging drum is on the top and the 18A carbon powder box below.
4, grab the middle of the 18A carbon powder box handle and pull out the 18A carbon powder box out of the internal track of the machine.
5. Grab the consumables and turn the hand to the 180 degrees to check whether the back chip of the consumables is clean. Gently wipe the surface of the chip with a clean paper towels and re -load the carbon box into the inside of the machine to close the cover.
6. If the chip is re -loaded into the printer, if ER11 is still prompted, it is recommended to replace other carbon powder box to try. If it is normal, it may be that there is a problem with the previous carbon powder box. Please contact the dealer to deal with this consumable. If the problem is still after replacement, it is recommended to contact local official service stations for testing for printer hardware issues.
7. If there is no chip after taking out the carbon powder box, it is a high chance that the original consumables of the non -printer brand. The third -party consumables identification and printing quality cannot be guaranteed. It is recommended to consider changing the original consumables of the printer brand.