2 thoughts on “paper jewelry bags wholesale What is the category of silver jewelry?”
Terrance
jewelry wholesale sc There are many classifications of silver jewelry. The classification of ingredients is mainly divided into foot silver jewelry and silver alloy jewelry: 1. Foot silver jewelry. The surface is smooth, silver -white, good ductility, and looks elegant and generous. But it is easy to oxidize (commonly known as discoloration) and insufficient hardness. 2. Silver alloy jewelry. The surface of the silver alloy jewelry is bright, there are still the characteristics of silver white, hardness and ductility, and convenient processing, and it looks exquisite and delicate, is strong. The silver alloy for jewelry is mainly silver and copper alloy, usually 92.5%of the silver content. In addition, there are lower silver -containing jewelry, especially some national -style first jewelry, which are very beautiful and delicate. 900 alloys are called currency silver, and the accessories are 800 or more alloys. The advantages of silver and copper alloy are harder than silver; thermal treatment can increase hardness, reduce the melting point, and improve the castability. In order to solve this problem, people did a lot of research and found that the cost of silver crickets was the lowest. In addition, in recent years, jewelry manufacturers have also introduced electroplating technology into silver jewelry processing, plating on the surface of the jewelry (that is, gold, and some can also electroplated two -color gold for beauty) to improve the wear resistance and corrosion resistance of jewelry. I heard that some can spray plating prizes ~! Intersection I wonder if everyone has seen in the market? ~! The understand of silver jewelry in the past two years in the silver jewelry factory, in fact, there is no foot silver jewelry in the market. Unless some special effects decorations will use Foot gold (including 99.9%of silver). So the current market is actually silver -alloy jewelry. The specific classification of silver alloy jewelry can be classified as follows: 925 silver: refers to the silver containing 92.5%of silver, which is recognized as sterling silver standards in international standards. 100%silver is soft, it cannot be formed during production, it is inconvenient to make silver jewelry, and it is relatively easy to oxidize, commonly known as discoloration. Min silver: 925 silver -plated white -plated white -plated white crickets (called platinum in the industry), which can delay the characteristics of the maximum delay of yellowing and turning yellow and black under oxidation or vulcanization. In the industry, 925 silver without plating white gold is called Suyin, and Su Yin is more likely to oxidize in the air. The 925 silver sold on the market now has a large proportion of products in order to reduce the cost, and it is all silver. Thailand: Thailand's specialty , the standard is also 925 silver content. The appearance lacks light, pursuing an old ancient silver effect. Compared with the 925 silver -plated silver jewelry, because the popular foundation is not extensive enough, the price is the bottom. However, at present, many Thai silver content has been greatly reduced. It is estimated that more than 80%of Thai Bank of Thailand's purity in the market is only about 80%. Tibetan silver: Generally does not contain the ingredients of silver, it is the elegant name of white copper (copper nickel alloy). Traditionally, Tibetan silver is 30%silver plus 70%of copper, but even the traditional Tibetan silver of traditional craftsmanship, Nowadays, it is not available in the market, and most of them are replaced by completely white copper. Sold with false and false silver: Make only one layer of silver with other metals to deceive customers. When identifying the jewelry department, because the test is only part of the surface layer, it is easily identified as a thin layer of silver or 925 silver with a thin layer of 999 silver or 925 silver. It is recommended to cut the silver jewelry from the middle to the most reasonable method when the silver jewelry is inspected to detect the innermost part of the middle. It, 950 silver is launched on the market, which is 95%of the silver. This kind of silver is only available in some factories. It is generally difficult to buy real 950 silver jewelry on the market ~! The silver jewelry with lower purity, generally 50%, 60%, 80%of silver. Because these silver contains relatively small silver, there are relatively the following shortcomings: 1. The color is not exquisite enough (the merchants generally plated a layer of platinum outside in order to cover this point); . The ductility is not strong, and the work will appear rough (especially some small places, it is easy to see it carefully); . Relatively hard; it is easier to break and damage than 925 silver!
wholesale softball jewelry There are many classifications of silver jewelry. According to the ingredient classification, it is mainly divided into foot silver jewelry and silver alloy jewelry:n1. Foot silver jewelry. The surface is smooth, silver -white, good ductility, and looks elegant and generous. But it is easy to oxidize (commonly known as discoloration) and insufficient hardness.n2. Silver alloy jewelry. The surface of the silver alloy jewelry is bright, there are still the characteristics of silver white, hardness and ductility, and convenient processing, and it looks exquisite and delicate.nStrong decorative. The silver alloy for jewelry is mainly silver and copper alloy, usually 92.5%of the silver content. In addition, there are lower silver -containing jewelry, especially some national -style first jewelry, which are very beautiful and delicate. 900 alloys are called currency silver, and the accessories are 800 or more alloys. The advantages of silver and copper alloy are harder than silver; thermal treatment can increase hardness, reduce the melting point, and improve the castability. In order to solve this problem, people did a lot of research and found that the cost of silver crickets was the lowest. In addition, in recent years, jewelry manufacturers have also introduced electroplating technology into silver jewelry processing, plating on the surface of the jewelry (that is, gold, and some can also electroplated two -color gold for beauty) to improve the wear resistance and corrosion resistance of jewelry. I heard that some can spray plating prizes ~! Intersection I wonder if everyone has seen in the market? ~!nAccording to my understanding of silver jewelry in the past two years in the silver jewelry factory, there is no foot silver jewelry in the market. Unless the decorations of some special effects will use Foot gold (including silver 99.9%). So the current market is actually silver -alloy jewelry. The specific classification of silver alloy jewelry can be classified as follows:n925 Silver: Refers to the silver with 92.5%of the silver, which is recognized as the sterling silver standard in international standards. 100%silver is soft, it cannot be formed during production, it is inconvenient to make silver jewelry, and it is relatively easy to oxidize, commonly known as discoloration.nSilver Silver: 925 silver -plated white -plated white -plated (called platinum in the industry), which can maximize the characteristics of delaying yellowing and turning yellow and black under oxidation or vulcanization. In the industry, 925 silver without plating white gold is called Suyin, and Su Yin is more likely to oxidize in the air. The 925 silver sold on the market now has a large proportion of products in order to reduce the cost, and it is all silver.nThailand: Thai specialtynThe standard is also the silver content of 925. The appearance lacks light, pursuing an old ancient silver effect. Compared with the 925 silver -plated silver jewelry, because the popular foundation is not extensive enough, the price is the bottom. However, at present, many Thai silver content has been greatly reduced. It is estimated that more than 80%of Thai Bank of Thailand's purity in the market is only about 80%.nTibetan silver: Generally, the ingredients without silver are the elegant names of white copper (copper nickel alloys). Traditionally Tibetan silver is 30%silver plus 70%of copper, but even Tibetan silver of traditional craftsmanship is now on the market. I can't see it anymore, mostly replaced with completely white copper.nAll kinds of false silver with false and false silver: use other metals to make only one layer of silver to deceive customers. When identifying the jewelry department, because the test is only part of the surface layer, it is easily identified as a thin layer of silver or 925 silver with a thin layer of 999 silver or 925 silver. It is recommended to cut the silver jewelry from the middle to the most reasonable method when the silver jewelry is inspected to detect the innermost part of the middle.nIn addition, 950 silver is launched on the market, which contains 95%of silver. This kind of silver is only available in some factories. It is generally difficult to buy real 950 silver jewelry on the market ~!nThere are also silver jewelry with lower purity, generally 50%, 60%, 80%of silver. Because these silver contains relatively small silver, there are relatively the following shortcomings:n 1. The color is not exquisite enough (merchants generally plated a layer of platinum outside in order to cover up this point);n 2. It is not strong, and the work will appear rough (especially some small places, it is easy to see it carefully);n3. Relatively stiff; it is easier to break from 925 silver ~! Easy to damage!
jewelry wholesale sc There are many classifications of silver jewelry.
The classification of ingredients is mainly divided into foot silver jewelry and silver alloy jewelry:
1. Foot silver jewelry. The surface is smooth, silver -white, good ductility, and looks elegant and generous. But it is easy to oxidize (commonly known as discoloration) and insufficient hardness.
2. Silver alloy jewelry. The surface of the silver alloy jewelry is bright, there are still the characteristics of silver white, hardness and ductility, and convenient processing, and it looks exquisite and delicate,
is strong. The silver alloy for jewelry is mainly silver and copper alloy, usually 92.5%of the silver content. In addition, there are lower silver -containing jewelry, especially some national -style first jewelry, which are very beautiful and delicate. 900 alloys are called currency silver, and the accessories are 800 or more alloys. The advantages of silver and copper alloy are harder than silver; thermal treatment can increase hardness, reduce the melting point, and improve the castability. In order to solve this problem, people did a lot of research and found that the cost of silver crickets was the lowest. In addition, in recent years, jewelry manufacturers have also introduced electroplating technology into silver jewelry processing, plating on the surface of the jewelry (that is, gold, and some can also electroplated two -color gold for beauty) to improve the wear resistance and corrosion resistance of jewelry. I heard that some can spray plating prizes ~! Intersection I wonder if everyone has seen in the market? ~!
The understand of silver jewelry in the past two years in the silver jewelry factory, in fact, there is no foot silver jewelry in the market. Unless some special effects decorations will use Foot gold (including 99.9%of silver). So the current market is actually silver -alloy jewelry. The specific classification of silver alloy jewelry can be classified as follows:
925 silver: refers to the silver containing 92.5%of silver, which is recognized as sterling silver standards in international standards. 100%silver is soft, it cannot be formed during production, it is inconvenient to make silver jewelry, and it is relatively easy to oxidize, commonly known as discoloration.
Min silver: 925 silver -plated white -plated white -plated white crickets (called platinum in the industry), which can delay the characteristics of the maximum delay of yellowing and turning yellow and black under oxidation or vulcanization. In the industry, 925 silver without plating white gold is called Suyin, and Su Yin is more likely to oxidize in the air. The 925 silver sold on the market now has a large proportion of products in order to reduce the cost, and it is all silver.
Thailand: Thailand's specialty
, the standard is also 925 silver content. The appearance lacks light, pursuing an old ancient silver effect. Compared with the 925 silver -plated silver jewelry, because the popular foundation is not extensive enough, the price is the bottom. However, at present, many Thai silver content has been greatly reduced. It is estimated that more than 80%of Thai Bank of Thailand's purity in the market is only about 80%.
Tibetan silver: Generally does not contain the ingredients of silver, it is the elegant name of white copper (copper nickel alloy). Traditionally, Tibetan silver is 30%silver plus 70%of copper, but even the traditional Tibetan silver of traditional craftsmanship, Nowadays, it is not available in the market, and most of them are replaced by completely white copper.
Sold with false and false silver: Make only one layer of silver with other metals to deceive customers. When identifying the jewelry department, because the test is only part of the surface layer, it is easily identified as a thin layer of silver or 925 silver with a thin layer of 999 silver or 925 silver. It is recommended to cut the silver jewelry from the middle to the most reasonable method when the silver jewelry is inspected to detect the innermost part of the middle.
It, 950 silver is launched on the market, which is 95%of the silver. This kind of silver is only available in some factories. It is generally difficult to buy real 950 silver jewelry on the market ~!
The silver jewelry with lower purity, generally 50%, 60%, 80%of silver. Because these silver contains relatively small silver, there are relatively the following shortcomings:
1. The color is not exquisite enough (the merchants generally plated a layer of platinum outside in order to cover this point);
. The ductility is not strong, and the work will appear rough (especially some small places, it is easy to see it carefully);
. Relatively hard; it is easier to break and damage than 925 silver!
wholesale softball jewelry There are many classifications of silver jewelry. According to the ingredient classification, it is mainly divided into foot silver jewelry and silver alloy jewelry:n1. Foot silver jewelry. The surface is smooth, silver -white, good ductility, and looks elegant and generous. But it is easy to oxidize (commonly known as discoloration) and insufficient hardness.n2. Silver alloy jewelry. The surface of the silver alloy jewelry is bright, there are still the characteristics of silver white, hardness and ductility, and convenient processing, and it looks exquisite and delicate.nStrong decorative. The silver alloy for jewelry is mainly silver and copper alloy, usually 92.5%of the silver content. In addition, there are lower silver -containing jewelry, especially some national -style first jewelry, which are very beautiful and delicate. 900 alloys are called currency silver, and the accessories are 800 or more alloys. The advantages of silver and copper alloy are harder than silver; thermal treatment can increase hardness, reduce the melting point, and improve the castability. In order to solve this problem, people did a lot of research and found that the cost of silver crickets was the lowest. In addition, in recent years, jewelry manufacturers have also introduced electroplating technology into silver jewelry processing, plating on the surface of the jewelry (that is, gold, and some can also electroplated two -color gold for beauty) to improve the wear resistance and corrosion resistance of jewelry. I heard that some can spray plating prizes ~! Intersection I wonder if everyone has seen in the market? ~!nAccording to my understanding of silver jewelry in the past two years in the silver jewelry factory, there is no foot silver jewelry in the market. Unless the decorations of some special effects will use Foot gold (including silver 99.9%). So the current market is actually silver -alloy jewelry. The specific classification of silver alloy jewelry can be classified as follows:n925 Silver: Refers to the silver with 92.5%of the silver, which is recognized as the sterling silver standard in international standards. 100%silver is soft, it cannot be formed during production, it is inconvenient to make silver jewelry, and it is relatively easy to oxidize, commonly known as discoloration.nSilver Silver: 925 silver -plated white -plated white -plated (called platinum in the industry), which can maximize the characteristics of delaying yellowing and turning yellow and black under oxidation or vulcanization. In the industry, 925 silver without plating white gold is called Suyin, and Su Yin is more likely to oxidize in the air. The 925 silver sold on the market now has a large proportion of products in order to reduce the cost, and it is all silver.nThailand: Thai specialtynThe standard is also the silver content of 925. The appearance lacks light, pursuing an old ancient silver effect. Compared with the 925 silver -plated silver jewelry, because the popular foundation is not extensive enough, the price is the bottom. However, at present, many Thai silver content has been greatly reduced. It is estimated that more than 80%of Thai Bank of Thailand's purity in the market is only about 80%.nTibetan silver: Generally, the ingredients without silver are the elegant names of white copper (copper nickel alloys). Traditionally Tibetan silver is 30%silver plus 70%of copper, but even Tibetan silver of traditional craftsmanship is now on the market. I can't see it anymore, mostly replaced with completely white copper.nAll kinds of false silver with false and false silver: use other metals to make only one layer of silver to deceive customers. When identifying the jewelry department, because the test is only part of the surface layer, it is easily identified as a thin layer of silver or 925 silver with a thin layer of 999 silver or 925 silver. It is recommended to cut the silver jewelry from the middle to the most reasonable method when the silver jewelry is inspected to detect the innermost part of the middle.nIn addition, 950 silver is launched on the market, which contains 95%of silver. This kind of silver is only available in some factories. It is generally difficult to buy real 950 silver jewelry on the market ~!nThere are also silver jewelry with lower purity, generally 50%, 60%, 80%of silver. Because these silver contains relatively small silver, there are relatively the following shortcomings:n 1. The color is not exquisite enough (merchants generally plated a layer of platinum outside in order to cover up this point);n 2. It is not strong, and the work will appear rough (especially some small places, it is easy to see it carefully);n3. Relatively stiff; it is easier to break from 925 silver ~! Easy to damage!